Cast Iron Sluice Valve PN 1.0 (Flanged) with Rising Stem

1. Product Summary

Parameter	Specification
Product	Cast Iron Sluice Valve PN 1.0 (Flanged) with Rising Stem
Design standard	IS 14846
Material	Cast Iron
Service	Water
Max working temperature	45°C

2. Design Features

• Design Reference Standard IS 14846
• Bolted Bonnet, Outside Screw, Yoke Type, Rising Spindle, Solid Wedge
• Rigid and Sturdy design
• Hand wheel operated
• Flanged ends to IS 1538
• Provision of Re-Packing under pressure

3. Hydrostatic Test Pressures

Test	Pressure
Shell	1.5 MPa
Seat	1.0 MPa

4. Bill of Materials

P.No.	Part	Material	Spec.	Qty.
1	Body	Cast Iron	IS 210 Gr. FG 200	1
2	Seat Ring	Bronze	IS 318 Gr. LTB 2	4
3	Wedge	Cast Iron	IS 210 Gr. FG 200	1
4	Stem	Stainless Steel	IS 6603 Gr. 12 Cr. 12	1
5	Gasket	Rubber	IS 638 Type B	1
6	Bonnet	Cast Iron	IS 210 Gr. FG 200	1
7	Bolt	Carbon Steel	IS 1363 Part 1 Class 4.6 As Reqd.	1
8	Nut	Carbon Steel	IS 1363 Part 3 Class 4.0 As Reqd.	1
9	Gland Packing	PTFE / graphite rings	—	—
10	Gland Flange	Cast Iron	IS 210 Gr. FG 200	1
11	Bolt	Carbon Steel	IS 1363 Part 1 Class 4.6	2
12	Nut	Carbon Steel	IS 1363 Part 3 Class 4.0	2
13	Sleeve S.G Iron IS 1865 1	—	—	1
14	Sleeve Nut	Stainless Steel	IS 6603 Gr. 12 Cr. 12	1
15	Handwheel	Cast Iron	IS 210 Gr. FG 200	1
16	Handwheel Nut	Stainless Steel	IS 6603 Gr. 12 Cr. 12	1
17	Back Seat Bush	Bronze	IS 318 Gr. LTB 2	1

5. Sizes / Dimensions

Size (Inches) Size (mm) A ±2 B	ØC	ØD ~ E (Max.)
2*	50	178	16	+2	165	(+1.5/-1.0)	210	350
2	1/2*	65	190	16	+2	185	(+1.5/-1.0)	210	410
3	80	203	21	±3	200	±4.5	225	455
4	100	229	22	±3	220	±4.5	255	540
5	125	254	22.5	±3	250	±4.5	255	588
6	150	267	23	±3	285	(+5.5/-2.5)	310	655
8	200	292	24.5	±3	340	(+5.5/-2.5)	395	780
10	250	330	26	±3	395	(+5.5/-2.5)	460	960
12	300	356	27.5	±3	445	(+5.5/-2.5)	460	1140
*	Flanges	as	per	IS	14846.

6. Enquiries

Email: info@supremevalves.in · Tel: +91 97732 78770