Cast Steel Sleeve Packed Water Level Gauge (Flanged)

1. Product Summary

Parameter	Specification
Product	Cast Steel Sleeve Packed Water Level Gauge (Flanged)
Design standard	Per datasheet
Material	Cast Steel
Service	Steam, Water
Max working temperature	425°C

Flanged End to BS 10 Table ‘J’
Automatic Shut Oﬀ Device in Water Arm
Available for both, Right Hand and Left Hand
Premium Quality Sleeve, Reinforced by metallic eye holes, is provided to avoid any clogging of passage
Each piece is fitted with self adjusting inverted taper plug (Stainless Steel) which forms a seal in the renewable moulded asbestos sleeve
Sleeve can easily be positioned by a rib which fits in the corresponding groove of the body

Test	Pressure
Shell	48 kg/cm²g (700 psig)
Seat	24.50 kg/cm²g (350 psig)

P.No.	Part	Material	Spec.	Qty.
1	Plug	Stainless Steel	ASTM A 276 Type 410	3
2	Gasket Steam Jointing Sheet IS 2712 Gr. W/3 4	—	—	1
3	Upper Arm Cast Steel IBR 73-80 Gr. B 1	—	—	1
4	Cone Synthetic	Rubber	IS 5192-1	2
5	Nut	Stainless Steel	ASTM A 276 Type 410	2
6	Washer	Bronze	IBR 282 (a) (iv) Gr. B	2
7	Glass Tube* Toughened Glass – – – 1	—	—	1
8	Lower arm Cast Steel IBR 73-80 Gr. B 1	—	—	1
9	Ball	Stainless Steel	ASTM A 276 Type 304	1
10	Drain Valve Cast Steel IBR 73-80 Gr. B 1	—	—	1
11	Sleeve Bush	Bronze	IBR 282 (a) (iv) Gr. B	6
12	Sleeve Moulded Asbestos – – – 3	—	—	1
13	Nipple	Stainless Steel	ASTM A 276 Type 410	1
14	Union Nut	Stainless Steel	ASTM A 276 Type 410	1
15	Nut	Carbon Steel	– – –	3
16	Name Plate	Brass	Aluminium – – –	3
17	Bonnet	Stainless Steel	ASTM A 276 Type 410	3
18	Stem	Stainless Steel	ASTM A 276 Type 410	3
19	Lock Nut	Stainless Steel	ASTM A 276 Type 410	3
20	Handle S.G Iron IS 1865 / ASTM A 536 3	—	—	1

Size (Inches) Size (mm) A
1/2	15	84
3/4	20	99