What is PCD on a flange chart?
Pitch circle diameter (bolt circle) — the diameter of the circle passing through bolt-hole centres.
Updated 2026-11-08 · Screening reference — confirm against the current ASME / API / EN edition before IFC.
Direct answer · Flange dimensions chart
Values below are millimetre screening figures commonly used by piping engineers. Thickness, hub and raised-face height also matter for gasket selection — confirm in ASME B16.5 / purchaser datasheet.
| NPS | DN | Flange OD (mm) | Bolt circle PCD (mm) | No. of bolts | Bolt size |
|---|---|---|---|---|---|
| ½" | 15 | 88.9 | 60.3 | 4 | ½" |
| ¾" | 20 | 98.4 | 69.9 | 4 | ½" |
| 1" | 25 | 108.0 | 79.4 | 4 | ½" |
| 1¼" | 32 | 117.5 | 88.9 | 4 | ½" |
| 1½" | 40 | 127.0 | 98.4 | 4 | ½" |
| 2" | 50 | 152.4 | 120.7 | 4 | ⅝" |
| 2½" | 65 | 177.8 | 139.7 | 4 | ⅝" |
| 3" | 80 | 190.5 | 152.4 | 4 | ⅝" |
| 4" | 100 | 228.6 | 190.5 | 8 | ⅝" |
| 6" | 150 | 279.4 | 241.3 | 8 | ¾" |
| 8" | 200 | 342.9 | 298.5 | 8 | ¾" |
| 10" | 250 | 406.4 | 362.0 | 12 | ⅞" |
| 12" | 300 | 482.6 | 431.8 | 12 | ⅞" |
| 14" | 350 | 533.4 | 476.3 | 12 | 1" |
| 16" | 400 | 596.9 | 539.8 | 16 | 1" |
| 18" | 450 | 635.0 | 577.9 | 16 | 1⅛" |
| 20" | 500 | 698.5 | 635.0 | 20 | 1⅛" |
| 24" | 600 | 812.8 | 749.3 | 20 | 1¼" |
| NPS | DN | Flange OD (mm) | Bolt circle PCD (mm) | No. of bolts | Bolt size |
|---|---|---|---|---|---|
| ½" | 15 | 95.3 | 66.7 | 4 | ½" |
| ¾" | 20 | 117.5 | 82.6 | 4 | ⅝" |
| 1" | 25 | 124.0 | 88.9 | 4 | ⅝" |
| 1½" | 40 | 155.6 | 114.3 | 4 | ¾" |
| 2" | 50 | 165.1 | 127.0 | 8 | ⅝" |
| 3" | 80 | 209.6 | 168.3 | 8 | ¾" |
| 4" | 100 | 254.0 | 200.0 | 8 | ¾" |
| 6" | 150 | 317.5 | 269.9 | 12 | ¾" |
| 8" | 200 | 381.0 | 330.2 | 12 | ⅞" |
| 10" | 250 | 444.5 | 387.4 | 16 | 1" |
| 12" | 300 | 520.7 | 450.9 | 16 | 1⅛" |
| 16" | 400 | 647.7 | 571.5 | 20 | 1¼" |
| 20" | 500 | 774.7 | 685.8 | 24 | 1¼" |
| 24" | 600 | 914.4 | 812.8 | 24 | 1½" |
| Facing | When used | RFQ note |
|---|---|---|
| RF (raised face) | Most process & utility Class 150/300 | “ASME B16.5 Class 150 RF” |
| RTJ (ring type joint) | High pressure / critical hydrocarbon | “Class 600/900/1500 RTJ” + ring number |
| FF (flat face) | Often with cast iron / brittle flanges | Do not mate RF to FF without check |
Also see the broader flange dimension tables library and PN16 vs Class 150.
Pitch circle diameter (bolt circle) — the diameter of the circle passing through bolt-hole centres.
No. Class 300 flanges are larger and use different bolt circles and often more/larger bolts.
Yes. State NPS, Class, facing (RF/RTJ), MOC and quantity on the RFQ.