PRV vs PSV Selection Chart

Updated 2026-11-08 · Screening reference — verify against purchaser spec and current standard editions.

Direct answer · PRV vs PSV

A PRV (pressure reducing valve) continuously regulates downstream pressure. A PSV/safety relief valve is a last-line overpressure device that opens at set pressure and reseats. Do not substitute one for the other on the P&ID.

Using this chart on a BOQ? Send size · class/PN · MOC · ends · qty for an Ahmedabad quote.

Contact / RFQ WhatsApp

Function matrix

TopicPRV / pressure reducingPSV / safety relief
PurposeControl downstream pressureProtect vessel/piping from overpressure
Normal stateModulating / throttlingClosed until set point
Sizing basisFlow + inlet/outlet P + CvOrifice letter / API 520/521 or steam codes
Set pressureOutlet set pointSet ≤ MAWP rules per code
Common mistakeUsing PRV as only overpressure protectionUsing PSV to regulate process pressure

Steam PRV RFQ essentials

FieldWhy
Inlet / outlet pressureOrifice & spring range
Flow (kg/h or t/h)Capacity
Media / superheatTrim & body MOC
End connectionFlanged Class / PN
Noise / pilot vs directStation design

PSV RFQ essentials

FieldWhy
Set / CDTPSpring selection
Orifice / API letterCapacity
Overpressure %Code compliance
BackpressureConventional vs balanced
Fluid stateSteam / gas / liquid

FAQ

Can one valve be both PRV and PSV?

No for code-compliant pressure protection. Keep regulating and safety functions separate unless a certified combination device is specified.

Do you size PSVs?

Provide process data; we quote constructions to the stated orifice/set. Final code sizing remains with the purchaser engineer.

IBR steam?

Mark IBR on steam PRV/PSV RFQs for Indian boiler lines.

Related charts