Valve Seat Leakage Class Chart (FCI 70-2 / IEC 60534)

Updated 2026-11-08 · Screening reference for engineers & contractors.

Direct answer · Leakage class chart

Seat leakage classes define how much flow may pass when the valve is closed. Soft-seated isolation valves often target bubble-tight / Class VI behaviour; metal-seated and control valves commonly specify Class IV or V. Always name the standard (FCI 70-2 or IEC 60534-4) on the datasheet.

RFQ from this chart — size · class/PN · MOC · ends · qty.

Contact / RFQ WhatsApp

Class overview (screening)

ClassTypical seatRelative leakage ideaCommon use
IIMetalHigher allowableOlder/dampened specs
IIIMetalTighter than IIGeneral metal seat
IVMetal0.01% of rated capacity (classic FCI statement)Common control valve metal seat
VMetalVery tight metal (pressure-dependent)Severe shutoff metal seat
VISoft (elastomer/PTFE)Bubble-tight style soft seatOn-off soft seat isolation

Exact formulas and test media differ by edition. Use purchaser datasheet numbers for FAT acceptance.

Isolation vs control

Valve roleTypical ask
On-off soft seat ball/butterflyClass VI or “bubble tight” + seat material
Metal seat gate/globeAPI 598 seat test + leakage statement
Control valveFCI 70-2 class + rated travel Cv
Pipeline ball API 6D6D leakage rate / purchaser class

FAQ

Is API 598 the same as FCI 70-2?

No. API 598 is a valve pressure test standard; FCI 70-2/IEC classes define control-valve seat leakage methods/limits.

Can metal seats meet Class VI?

Class VI is associated with soft seats. Metal seats use other classes or API 598 criteria.

What should I write on the RFQ?

Example: “Soft seat ball, PTFE seats, Class VI shutoff, API 598 shell/seat tested.”

Related charts