Butt Weld vs Socket Weld Valve Ends: Project Choice Guide
Technical guide · Supreme Valves India · Updated 2026-11-17
Direct answer: Choose butt weld (BW) when the piping class requires full-penetration welds and NDE. Choose socket weld (SW) for many small-bore forged valves where the spec allows B16.11 sockets. Never assume SW and BW are interchangeable on the same isometric.
Decision cues
- Owner piping class end type table
- NDE requirements (RT/UT on BW)
- Crevice corrosion risk (SW crevice)
- Size: SW common ≤ NPS 2; BW common on larger process valves
Related: socket depth checklist, RFQ.
Frequently asked questions
Why prefer BW on critical process lines?
Butt welds allow full-penetration welds and volumetric NDE. Socket welds leave a crevice and are often limited on severe cyclic or corrosive duties.
Are small forged valves usually SW or NPT?
Many API 602 small-bore valves are SW or threaded. BW is used when the piping spec demands it.