Duplex Valve RFQ Checklist: Tag List vs Vendor Drawing

Technical guide · Supreme Valves India · Updated 2026-11-17

Direct answer: When a duplex RFQ has both a tag list and a vendor drawing pack, quote the tag list + standards unless the buyer explicitly says “match the drawings.” Flag every conflict in writing before price commitment.

Conflicts that must stop the clock

How Supreme handles it

We send a short clarification: quote basis (A) drawings as shared or (B) tag list + ASME/ISO/API/EN practice. Until the buyer picks A or B, delivery clocks and GA approval should not start.

Minimum duplex PO text

“Body/bonnet/trim UNS S32205 (or S31803 as agreed), ends and class per tag list, non-asbestos packing, design standard ____, test ____, EN 10204 3.1 MTC.”

Related pages: duplex manufacturer, F51 vs F53, RFQ.

Frequently asked questions

Should I approve a drawing that shows Size 40 when the tag is 25 NB?

No. Face-to-face and flange drilling will be wrong. Reject or revise before approval.

UNS S31803 or S32205?

Both are duplex families used commercially as 2205-type. Confirm the exact grade on the purchase order and MTC. Do not leave “Duplex” unqualified on critical chloride service.

Is BS 5159 valid for ball valves?

No. BS 5159 is a cast-iron butterfly standard. Ball valves should reference ISO 17292, API 608/6D practice, or ASME B16.34 as applicable.

Related products & guides

Request valve RFQ →