ASME B16.10 Face-to-Face Calculator — Gate, Globe, Check

Updated 2026-11-10 · Screening tool · Verify against current standards before design freeze.

Direct answer · What this calculator does

Select type, NPS and Class. Returns the common B16.10 short-pattern / standard F-F used to verify isometrics before ordering.

Got a size from this tool? Send type · size · Class/PN · MOC · ends · qty.

Contact / RFQ Quote page WhatsApp

Face-to-face inputs

Results

Copy into your RFQ or open Contact / RFQ.

Formulas used

Values are common B16.10 flanged lengths (mm) for screening
Pressure-seal, cryogenic extended, and some bellows designs differ
Always freeze on the purchase order datasheet
Write “F-F per ASME B16.10” on the RFQ when the isometric is already frozen.
Screening only. Wafer / lug / compact pattern valves do not use these flanged F-F numbers.

Reference table

TypePattern note
GateRising stem OS&Y flanged
GlobeStandard pattern flanged
Swing checkFlanged BS1868 / API style

How to use the result on an RFQ

  1. Run with your design data.
  2. Record the green outputs.
  3. Paste type, size, Class/PN, MOC, ends, qty into contact or WhatsApp.
  4. Request 3.1 MTC / API 598 notes when required.

FAQ

Why does globe F-F exceed gate?

Globe internal path is longer; B16.10 reflects that.

Class 300 vs 150 length?

Often longer on higher classes for the same NPS — check the table.

Can I shorten F-F?

Only with purchaser-approved compact / wafer designs.

Related calculators & charts

Supreme Valves India supplies constructions by size, rating, MOC and ends. Outputs are screening aids, not certified design.