ASME B16.10 Face-to-Face Chart (Gate, Globe, Check)

Updated 2026-11-08 · Screening reference — confirm against the current ASME / API / EN edition before IFC.

Direct answer · Face-to-face chart

ASME B16.10 defines face-to-face (F-F) and end-to-end dimensions for flanged and buttwelding valves. Use this chart to check whether a Class 150 gate, globe or swing check will fit an existing spool — wrong F-F is a common site rejection.

Need valves matching this chart? Send size · rating · MOC · ends · qty.

Contact / RFQ WhatsApp

Class 150 — Gate valve F-F (mm)

NPSDNFace-to-face (mm)
2"50178
2½"65191
3"80203
4"100229
6"150267
8"200292
10"250330
12"300356
14"350381
16"400406
18"450432
20"500457
24"600508

Class 150 — Globe valve F-F (mm)

NPSDNFace-to-face (mm)
2"50203
3"80241
4"100292
6"150406
8"200495
10"250622
12"300698

Globe F-F is longer than gate at the same NPS because of the internal baffle path.

Class 150 — Swing check F-F (mm)

NPSDNFace-to-face (mm)
2"50203
3"80241
4"100292
6"150356
8"200495
10"250622
12"300698

RFQ wording

6" Class 150 WCB OS&Y gate, RF, F-F per ASME B16.10, API 598 tested. If the line already exists, state the measured spool length and ask for confirmation against B16.10.

FAQ

Does wafer butterfly use B16.10?

Wafer/lug butterflies typically sit between flanges; laying length follows API 609 / manufacturer standard — confirm separately from gate F-F.

Are Class 300 F-F the same as Class 150?

Not always. Higher classes often have different F-F series in B16.10 — check the class column in the standard.

Can you match a non-standard F-F?

Sometimes with spool pieces or specials. Flag non-standard F-F on the RFQ early.

Related charts