ASME B16.34 Material Group Chart

Updated 2026-11-08 · Screening reference for engineers & contractors.

Direct answer · Material groups for P-T ratings

ASME B16.34 rates valves by Class + material group + temperature. Carbon steels (e.g. WCB / A105) typically sit in Group 1.x; austenitic stainless (e.g. CF8M / F316) in Group 2.x. Same Class number ≠ same allowable bar at temperature across groups. Use this orientation chart, then open the ASME B16.34 pressure-rating tables for numbers.

RFQ from this chart — size · class · MOC (group) · ends · qty.

Contact / RFQ WhatsApp

Group orientation (common valve MOCs)

Material familyTypical ASTM gradesB16.34 group (typical)RFQ note
Carbon steel cast / forgeA216 WCB, A1051.1Most process CS gates/balls
Carbon steel low-tempA352 LCB/LCC, A350 LF21.1 / check editionImpact test temperature on datasheet
C-Mo / Cr-Mo alloyWC6, WC9, F11, F221.9 / 1.10 / 1.13 (verify grade)Hot steam / high temp lines
18Cr-8Ni stainlessCF8, F3042.1General corrosion
18Cr-8Ni-Mo stainlessCF8M, F316, F316L2.2Common CRA process pick
Duplex / super duplexA995 4A/5A/6A, F51/F53Per edition group tablesChloride / strength services
Nickel alloysCW6MC, N06625…Group 3.x familySevere corrosion — confirm group

Group numbers above are orientation aids. Always map the exact ASTM designation and product form to the material group list in the current ASME B16.34 edition.

How groups affect Class selection

SituationWhat to check
Same Class 150, WCB vs CF8M at elevated TDifferent allowable working pressures — open P-T tables
Hydrotest planningShell/seat pressures derive from cold rating of the material group
PN vs Class projectsDo not equate PN16 to Class 150 without checking MOC & flange standard
API product standardsAPI 600 / 602 / 608 still rate via B16.34 groups

Workflow to a freeze rating

StepAction
1Select body ASTM grade (cast or forge)
2Find B16.34 material group for that grade
3Pick ASME Class from flange / piping design
4Read allowable pressure at design temperature from group table
5Confirm ends (B16.5 / B16.25) and product std (API 600/602/608…)
6Quote via contact.html with size · class · MOC · ends · qty

Full numeric P-T: asme-b16-34-pressure-rating.html (WCB / CF8M screening). Related: API 600 / 602 / 603 · PN16 vs Class 150 · WCB full form.

FAQ

What is an ASME B16.34 material group?

B16.34 assigns cast and forged materials to numbered groups (e.g. 1.1 for many carbon steels, 2.2 for many 316/CF8M alloys). Each group has its own pressure-temperature rating table for a given Class.

Is WCB always Group 1.1?

WCB / A105 are commonly treated under Group 1.1 in B16.34 tables — confirm the exact group for the ASTM grade and product form in the current edition before design freeze.

Where are the bar/psi numbers?

Use the ASME B16.34 pressure-rating page on this site for tabulated WCB / CF8M screening values, then verify against the published standard edition.

Related charts