Wafer or lug for AHU isolation?
If one flange may be removed, specify lug-rated construction.
Updated 2026-11-08 · Screening reference for engineers & contractors.
Direct answer · HVAC valve chart
Building-services contractors lose days when seat material or lug rating is wrong. Lock these fields before tender BOQ freeze.
| Line | Valve | Notes |
|---|---|---|
| CHW mains DN100–600 | DI/Al butterfly wafer PN16 | EPDM seat common |
| Dead-end equipment | Lug butterfly | Rated for one-side removal |
| Branch ≤DN50 | Ball valve PN16/Class 150 | Full bore preferred |
| Pump discharge | Check valve | Slam note if high head |
| Isolation + drain | Ball + hose union | Maintenance |
| Part | Common HVAC pick | Watch-out |
|---|---|---|
| Seat | EPDM | NBR for oils; PTFE for chemicals |
| Disc | DI nylon / SS | SS for aggressive water |
| Operator | Lever ≤DN150; gear above | Stem extension if insulated |
If one flange may be removed, specify lug-rated construction.
Do not mix fire-listed constructions with commercial HVAC seats unless the listing is required.
State insulation thickness on the RFQ.