NPT or BSP for instrument air?
Match plant tubing/fitting standard — never assume.
Updated 2026-11-08 · Screening reference — verify against purchaser spec and current standard editions.
Direct answer · Instrument air chart
Using this chart on a BOQ? Send size · class/PN · MOC · ends · qty for an Ahmedabad quote.
Contact / RFQ WhatsApp| Component | Typical size | MOC | Notes |
|---|---|---|---|
| Isolation ball | ¼"–1" | SS316 / brass | Full bore preferred for filters |
| Needle valve | ¼"–½" | SS316 | Panel / transmitter isolation |
| Solenoid | ¼"–½" | Brass / SS | Voltage + NA/NC |
| Filter-regulator | ¼"–1" | Al / SS | Upstream of positioners |
| Check / dump | ¼"–½" | SS316 | Fail-safe air logic |
| Field | Example |
|---|---|
| Port / thread | ½" NPT |
| Pressure | 10 bar instrument air |
| Actuation | 24 V DC solenoid, fail closed |
| Qty / tags | Per loop count |
Match plant tubing/fitting standard — never assume.
State air quality class if soft seats/seals are sensitive.
Yes — list actuator air supply and accessories on the RFQ.