Orifice Plate Flow Calculator — ΔP to Flow Screening

Updated 2026-11-10 · Screening tool · Verify against current standards before design freeze.

Direct answer · What this calculator does

Liquid orifice screening: Q ≈ C × A × √(2ΔP/ρ). Enter line ID, orifice bore and ΔP for a first-cut flow — then compare to the valve Cv you plan to buy.

Got a size from this tool? Send type · size · Class/PN · MOC · ends · qty.

Contact / RFQ Quote page WhatsApp

Orifice inputs

mm
mm
bar
kg/m³

Results

Copy into your RFQ or open Contact / RFQ.

Formulas used

Q (m³/s) = C × A_o × √(2ΔP/ρ)
A_o = π (d/2)² · C ≈ 0.61 (sharp thin plate screening)
β = d/D · keep β typically 0.2–0.7 for meters
Restriction orifices upstream/downstream of control valves change available ΔP — include them in the valve sizing budget.
Screening only. Not AGA/ISO meter-quality. Discharge coefficient varies with Reynolds number and plate geometry.

Reference table

β = d/DTypical use
0.3–0.5Common metering
0.5–0.7Higher capacity, lower ΔP
<0.2Strong restriction

How to use the result on an RFQ

  1. Run with your design data.
  2. Record the green outputs.
  3. Paste type, size, Class/PN, MOC, ends, qty into contact or WhatsApp.
  4. Request 3.1 MTC / API 598 notes when required.

FAQ

Is this for gas too?

Gas needs expansibility. This page is liquid screening only.

Where do valves sit relative to orifices?

Follow straight-run rules for meters; isolation valves outside the meter run.

Can a valve replace an RO?

Sometimes a globe with known Cv is used for restriction — confirm noise and cavitation.

Related calculators & charts

Supreme Valves India supplies constructions by size, rating, MOC and ends. Outputs are screening aids, not certified design.