Reynolds Number & Flow Regime Calculator

Updated 2026-11-10 · Screening tool · Verify against current standards before design freeze.

Direct answer · What this calculator does

Re = ρ V D / μ. Re < ~2300 suggests laminar; above ~4000 turbulent. Regime affects ΔP correlations, control-valve behaviour and strainer performance.

Got a size from this tool? Send type · size · Class/PN · MOC · ends · qty.

Contact / RFQ Quote page WhatsApp

Flow regime inputs

m³/h
mm
kg/m³
Pa·s

Results

Copy into your RFQ or open Contact / RFQ.

Formulas used

V = Q / A · A = π(D/2)²
Re = ρ V D / μ
μ water ≈ 0.001 Pa·s at 20°C · oils much higher
Viscous oils (low Re) may need larger Cv and different trim — state viscosity on the RFQ.
Screening only. Transition band is approximate. Local fittings disturb ideal pipe Re.

Reference table

ReRegimeValve note
<2300LaminarViscous / low velocity
2300–4000TransitionUncertain ΔP
>4000TurbulentMost water/steam/gas lines

How to use the result on an RFQ

  1. Run with your design data.
  2. Record the green outputs.
  3. Paste type, size, Class/PN, MOC, ends, qty into contact or WhatsApp.
  4. Request 3.1 MTC / API 598 notes when required.

FAQ

Why does Re matter for valves?

Cv tests assume turbulent water. Viscous services need correction factors.

What viscosity should I enter?

Use process temperature viscosity, not ambient datasheet oil grade alone.

Steam Re?

Use vapour density and viscosity at the steam condition — or size with steam equations instead.

Related calculators & charts

Supreme Valves India supplies constructions by size, rating, MOC and ends. Outputs are screening aids, not certified design.