Cast Iron Globe Steam Stop Valve Angle Pattern (Flanged)
Flanged · Steam, Water
Shell 26 kg/cm²g (370 Max 220°C
Overview
Cast Iron Globe Steam Stop Valve Angle Pattern (Flanged) for steam, water service. End connection: flanged. Refer to bill of materials and dimensions below for full technical specification.
Salient Features
- Flanged Ends to DIN 2533 PN 16RF
- Angle Pattern, Outside Screw, Yoke Type, Rising Stem
- Renewable 13% Cr
- Stainless Steel (S.S 410) working parts
- Provision for re-packing under pressure
- Minimum pressure drop inside the body due to streamlined body design
- High lift of the seat to avoid any obstruction in the flow
- Sturdy and comparatively bigger sized wheel provided to give sufficient torque for easy operation
Test & Service Limits
| Test / Parameter | Value |
|---|---|
| Hydrostatic shell test | 26 kg/cm²g (370 psig) |
| Maximum working temperature | 220°C |
Service media: Steam, Water.
Bill of Materials
| P.No. | Part | Material | Specification | Qty. |
|---|---|---|---|---|
| 1 | Nut | Carbon Steel | – – – | 1 |
| 2 | Washer | Carbon Steel | – – – | 1 |
| 3 | Handwheel | Cast Iron | IS 210 Gr. FG 200 | 1 |
| 4 | Stem | Stainless Steel | ASTM 276 Type 410 | 1 |
| 5 | Yoke Bush | Bronze | IS 318 Gr. LTB 2 | 1 |
| 6 | Locking Screw | Carbon Steel | – – – | 1 |
| 7 | Gland Flange | Cast Iron | IBR 86-93 Gr. A | 1 |
| 8 | Bonnet | Cast Iron | IBR 86-93 Gr. A | 1 |
| 9 | Gland Packing | PTFE / graphite rings | — | — |
| 10 | Studs | Carbon Steel | IS 1367 As Reqd. | 1 |
| 11 | Nuts | Carbon Steel | IS 1367 As Reqd. | 1 |
| 12 | Gasket Steam Jointing Sheet IS 2712 Gr. W/3 1 | — | — | 1 |
| 13 | Stem Nut | Stainless Steel | ASTM A 276 Type 410 | 1 |
| 14 | Stem Ring | Stainless Steel | ASTM A 276 Type 410 | 1 |
| 15 | Disc | Cast Iron | IBR 86-93 Gr. A | 1 |
| 16 | Seat Ring | Stainless Steel | ASTM A 276 Type 410 / ASTM | 1 |
| 17 | Body Seat Ring | Stainless Steel | ASTM A 276 Type 410 / ASTM | 1 |
| 18 | Body | Cast Iron | IBR 86-93 Gr. A | 1 |
| 19 | Nuts | Carbon Steel | IS 1367 | 2 |
| 20 | Bolts | Carbon Steel | IS 1367 | 2 |
Sizes / Dimensions
| Size (Inches) Size (mm) A±1.5 B ~ | ØC ~ | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2 | 15 | 90 | 150 | 96 | ||||||||||||
| 3/4 | 20 | 95 | 154 | 96 | ||||||||||||
| 1 | 25 | 100 | 162 | 118 | ||||||||||||
| 1 | 1/4 | 32 | 105 | 176 | 118 | |||||||||||
| 1 | 1/2 | 40 | 115 | 204 | 150 | |||||||||||
| 2 | 50 | 125 | 223 | 150 | ||||||||||||
| 2 | 1/2 | 65 | 145 | 250 | 180 | |||||||||||
| 3 | 80 | 155 | 275 | 200 | ||||||||||||
| 4 | 100 | 175 | 305 | 235 | ||||||||||||
| 6 | 150 | 225 | 419 | 350 | ||||||||||||
| 8* | 200 | 275 | 475 | 435 | ||||||||||||
| * | Pressure | and | Temperature | for | 200 | mm | Valve | is | as | per | PN10 | and | flanges | to | PN | 10RF. |
Dimensions per datasheet table. Confirm flange standard and size at enquiry.