Cast Iron Sluice Valve PN 1.6 (Flanged) with Rising Stem
Flanged · Water
IS 14846Shell 2.4 MPaMax 45°C
Quick answer: Cast Iron Sluice Valve PN 1.6 (Flanged) with Rising Stem for water service. Design per IS 14846. End connection: flanged. Refer to bill of materials and dimensions below for full technical specification.
Overview
Cast Iron Sluice Valve PN 1.6 (Flanged) with Rising Stem for water service. Design per IS 14846. End connection: flanged. Refer to bill of materials and dimensions below for full technical specification.
Salient Features
- Design Reference Standard IS 14846
- Bolted Bonnet, Outside Screw, Yoke Type, Rising Spindle, Solid Wedge
- Rigid and Sturdy design
- Hand wheel operated
- Flanged ends to IS 1538
- Provision of Re-Packing under pressure
Test & Service Limits
| Test / Parameter | Value |
|---|---|
| Hydrostatic shell test | 2.4 MPa |
| Hydrostatic seat test | 1.6 MPa |
| Maximum working temperature | 45°C |
Service media: Water.
Bill of Materials
| P.No. | Part | Material | Specification | Qty. |
|---|---|---|---|---|
| 1 | Body | Cast Iron | IS 210 Gr. FG 200 | 1 |
| 2 | Seat Ring | Bronze | IS 318 Gr. LTB 2 | 4 |
| 3 | Wedge | Cast Iron | IS 210 Gr. FG 200 | 1 |
| 4 | Stem | Stainless Steel | IS 6603 Gr. 12 Cr. 12 | 1 |
| 5 | Gasket | Rubber | IS 638 Type B | 1 |
| 6 | Bonnet | Cast Iron | IS 210 Gr. FG 200 | 1 |
| 7 | Bolt | Carbon Steel | IS 1363 Part 1 Class 4.6 As Reqd. | 1 |
| 8 | Nut | Carbon Steel | IS 1363 Part 3 Class 4.0 As Reqd. | 1 |
| 9 | Gland Packing | PTFE / graphite rings | — | — |
| 10 | Gland Flange | Cast Iron | IS 210 Gr. FG 200 | 1 |
| 11 | Bolt | Carbon Steel | IS 1363 Part 1 Class 4.6 | 2 |
| 12 | Nut | Carbon Steel | IS 1363 Part 3 Class 4.0 | 2 |
| 13 | Sleeve S.G Iron IS 1865 1 | — | — | 1 |
| 14 | Sleeve Nut | Stainless Steel | IS 6603 Gr. 12 Cr. 12 | 1 |
| 15 | Handwheel | Cast Iron | IS 210 Gr. FG 200 | 1 |
| 16 | Washer | Carbon Steel | – – – | 1 |
| 17 | Handwheel Nut | Stainless Steel | IS 6603 Gr. 12 Cr. 12 | 1 |
| 18 | Back Seat Bush | Bronze | IS 318 Gr. LTB 2 | 1 |
Sizes / Dimensions
| Size (Inches) Size (mm) A ±2 B | ØC | ØD ~ E (Max.) | |||||||
|---|---|---|---|---|---|---|---|---|---|
| 2* | 50 | 178 | 16 | +2 | 165 | (+1.5/-1.0) | 210 | 350 | |
| 2 | 1/2* | 65 | 190 | 16 | +2 | 185 | (+1.5/-1.0) | 210 | 410 |
| 3 | 80 | 203 | 21 | ±3 | 200 | ±4.5 | 225 | 455 | |
| 4 | 100 | 229 | 22 | ±3 | 220 | ±4.5 | 255 | 540 | |
| 6 | 150 | 267 | 23 | ±3 | 285 | (+5.5/-2.5) | 310 | 655 | |
| 8 | 200 | 292 | 24.5 | ±3 | 340 | (+5.5/-2.5) | 395 | 780 | |
| 10 | 250 | 330 | 26 | ±3 | 395 | (+5.5/-2.5) | 460 | 960 | |
| 12 | 300 | 356 | 27.5 | ±3 | 445 | (+5.5/-2.5) | 460 | 1140 | |
| * | Flanges | as | per | IS | 14846. |
Dimensions per datasheet table. Confirm flange standard and size at enquiry.