API 623 Globe Valve Standard Explained: Scope and Key Requirements
Technical guide · Supreme Valves India · Updated 2026-11-21
API 623 is the American Petroleum Institute standard for heavy-duty steel globe valves in refinery and petrochemical service. It does for globe valves what API 600 does for gate valves. If a datasheet says "globe valve to API 623", this is what the buyer is asking for.
What API 623 covers
| Item | API 623 scope |
|---|---|
| Full title | Steel Globe Valves — Flanged and Butt-welding Ends, Bolted Bonnets |
| Sizes | NPS 2 to NPS 24 (DN 50 to DN 600) |
| Pressure classes | Class 150, 300, 600, 900, 1500 and 2500 |
| Construction | Bolted bonnet, outside screw and yoke, rising stem |
| Ends | Flanged or butt-welding |
| First published | 2013 |
Small forged globe valves, NPS 4 and below with socket-weld or threaded ends, are covered by API 602 instead.
Why the standard was written
Before API 623, cast steel globe valves for refineries were usually bought to BS 1873 together with ASME B16.34. B16.34 sets pressure-temperature ratings and minimum wall thickness, but it says little about stems, stuffing boxes or packing. Refinery users wanted the same heavier construction for globe valves that API 600 already required for gate valves, and API 623 put those requirements into one document.
Main requirements
- Heavier wall. Minimum body and bonnet wall thickness is greater than the ASME B16.34 minimum, which gives a larger corrosion and erosion allowance.
- Stem and stuffing box. The standard sets minimum stem diameters and stuffing box dimensions by size and class, so the stem is sized for the higher thrust a globe valve needs to close against line pressure.
- Trim. Seating surfaces and stem materials are specified by trim number, in the same way as API 600.
- Backseat. A backseat is required, although it is not to be relied on for repacking under pressure.
- Fugitive emissions. Valves with graphite packing are expected to be qualified by type test to API 624.
- Pressure-temperature ratings follow ASME B16.34.
- Dimensions. Face-to-face and end-to-end to ASME B16.10, flanges to ASME B16.5, butt-weld ends to ASME B16.25.
- Testing to API 598.
Read the current edition for the exact clause wording, tables and any updates before you write a specification.
API 623 compared with related standards
| Standard | Valve | Typical use |
|---|---|---|
| API 623 | Cast steel globe, NPS 2 to 24, bolted bonnet | Refinery and petrochemical process lines |
| BS 1873 | Steel globe and globe stop-and-check | General industry; still quoted on many Indian and Middle East specifications |
| API 602 | Forged gate, globe and check, NPS 4 and below | Small-bore lines, Class 800 and 1500 |
| API 600 | Cast steel gate, bolted bonnet | The gate valve counterpart of API 623 |
| ASME B16.34 | All steel valves | Ratings and minimum wall; referenced by all of the above |
About "API 623 PDF" downloads
API standards are copyrighted and sold by the American Petroleum Institute and its licensed resellers. Free copies found online are usually out of date or unauthorised, and we cannot host the document. For procurement, most buyers do not need the full text: a valve datasheet stating compliance with API 623, with the items below filled in, is enough to obtain comparable offers.
RFQ checklist for an API 623 globe valve
- Size and pressure class.
- Ends: flanged RF or RTJ, or butt weld with the pipe schedule.
- Body and bonnet material, for example WCB, LCB, WC6, WC9, CF8M.
- Trim number or trim materials, including any hardfacing.
- Disc type: plug, ball or needle type, and whether a stop-check is needed.
- Service fluid, design pressure and temperature, and flow direction.
- Operation: handwheel, gear operator or actuator.
- Fugitive emission requirement: API 624 or ISO 15848.
- Sour service: NACE MR0175 / ISO 15156 if applicable.
- Inspection and documents: API 598 tests, EN 10204 3.1 certificates, any third-party inspection.
Frequently asked questions
What is API 623?
API 623 is the American Petroleum Institute standard for steel globe valves with flanged or butt-welding ends and bolted bonnets, in sizes NPS 2 to 24 and Class 150 to 2500, for refinery and petrochemical service.
What is the difference between API 623 and BS 1873?
Both cover steel globe valves. API 623 is the newer standard, first published in 2013, and adds heavier wall thickness, minimum stem diameters and stuffing box dimensions in line with API 600 practice. BS 1873 is still quoted on many specifications.
Does API 623 cover forged globe valves?
Small forged globe valves, NPS 4 and below with socket-weld or threaded ends, are covered by API 602. API 623 covers NPS 2 to 24 with flanged or butt-welding ends.
Which test standard applies to API 623 globe valves?
Pressure testing is to API 598. Valves with graphite packing are expected to be qualified for fugitive emissions by type test to API 624.
Where can I download the API 623 PDF?
The standard is copyrighted and sold by the American Petroleum Institute and licensed resellers. For procurement, a datasheet stating compliance with API 623 is normally sufficient.