Class 800 Valve Pressure Rating in bar, kg/cm² and psi
Technical guide · Supreme Valves India · Updated 2026-11-21
Short answer: a Class 800 forged carbon steel valve (ASTM A105) is rated for 136.2 bar, which is 138.9 kg/cm² or 1,975 psi, at temperatures from −29 °C to 38 °C. The rating falls as temperature rises. "800" is a class designation, not 800 psi.
Class 800 rating by temperature (A105 carbon steel)
| Temperature | bar | kg/cm² | psi |
|---|---|---|---|
| −29 to 38 °C | 136.2 | 138.9 | 1,975 |
| 50 °C | 133.7 | 136.3 | 1,939 |
| 100 °C | 124.3 | 126.8 | 1,803 |
| 150 °C | 120.2 | 122.6 | 1,743 |
| 200 °C | 116.8 | 119.1 | 1,694 |
For stainless steel bodies the cold rating is a little lower: an F316 or F304 Class 800 valve is rated 132.4 bar (135.0 kg/cm², 1,920 psi) at −29 to 38 °C. Above 200 °C, and for other materials, read the rating from the current edition of API 602 or ASME B16.34 for the body material group. Do not extrapolate from this table.
Why Class 800 is not on a flange chart
ASME B16.5 flanges come in Class 150, 300, 400, 600, 900, 1500 and 2500. There is no Class 800 flange. Class 800 is an intermediate rating defined in API 602 for small forged steel valves with socket-weld and threaded ends. A forged valve with flanged ends is rated to the flange class instead: 150, 300, 600 or 1500.
This is why a piping material class for a Class 600 line normally calls for Class 800 socket-weld valves in the small-bore sizes. The Class 800 valve covers the Class 600 rating with margin, and one valve can be stocked for Class 150, 300 and 600 lines.
How the Class 800 rating is calculated
API 602 sets the Class 800 pressure rating by interpolating between the Class 600 and Class 900 ratings of the same material at the same temperature:
P800 = ⅓ × P600 + ⅔ × P900
For A105 at 38 °C, Class 600 is 102.1 bar and Class 900 is 153.2 bar, so Class 800 = (102.1 + 2 × 153.2) ÷ 3 = 136.2 bar.
Converting between bar, kg/cm² and psi
- 1 bar = 1.0197 kg/cm² = 14.504 psi
- 1 kg/cm² = 0.9807 bar = 14.223 psi
- 1 MPa = 10 bar
Indian purchase specifications often state pressure in kg/cm²(g). The difference from bar is about 2%, which matters when a design pressure sits close to the rating.
Class 800 compared with neighbouring classes
| Class | A105 rating at 38 °C | Typical forged valve ends |
|---|---|---|
| Class 600 | 102.1 bar (104.1 kg/cm², 1,480 psi) | Flanged RF or RTJ |
| Class 800 | 136.2 bar (138.9 kg/cm², 1,975 psi) | Socket weld, threaded NPT |
| Class 1500 | 255.3 bar (260.3 kg/cm², 3,705 psi) | Socket weld, threaded, butt weld, flanged RTJ |
Test pressures
Under API 598 the shell test is at 1.5 times the 38 °C rating and the high-pressure closure (seat) test is at 1.1 times. For an A105 Class 800 valve that is about 205 bar on the shell and about 150 bar on the seat. The test certificate should state the actual pressures and durations used.
What to write on the RFQ
- Valve type and size: gate, globe or check, NPS ¼ to 2 is the common range.
- Rating: Class 800 (or Class 1500 if the line needs it).
- Ends: socket weld to ASME B16.11, or threaded NPT to ASME B1.20.1.
- Body and trim: for example A105 body with 13Cr trim, or F316 body and trim.
- Bonnet: bolted or welded. Port: standard (reduced) or full.
- Design temperature and pressure, so the rating can be checked at temperature.
- Documents: EN 10204 3.1 certificate, API 598 test certificate, IBR if it is a boiler line in India.
Frequently asked questions
What is the pressure rating of a Class 800 valve in bar?
A Class 800 forged carbon steel (A105) valve is rated 136.2 bar at −29 to 38 °C. The rating reduces with temperature, to about 124.3 bar at 100 °C and 116.8 bar at 200 °C.
What is Class 800 in kg/cm²?
136.2 bar is 138.9 kg/cm² for A105 at −29 to 38 °C. For F316 stainless steel the figure is 132.4 bar, or 135.0 kg/cm².
Is Class 800 the same as 800 psi?
No. Class 800 is a designation, not a pressure. An A105 Class 800 valve is rated 1,975 psi at ambient temperature.
Why is there no Class 800 flange?
ASME B16.5 flange classes are 150, 300, 400, 600, 900, 1500 and 2500. Class 800 is an intermediate rating in API 602 for forged valves with socket-weld and threaded ends only.
How is the Class 800 rating calculated?
API 602 interpolates between Class 600 and Class 900 for the same material and temperature: one third of the Class 600 rating plus two thirds of the Class 900 rating.