Gear Operator Sizing Notes for Gate and Butterfly Valves
Technical guide · Supreme Valves India · Updated 2026-11-17
Direct answer: Specify a gear operator when valve torque exceeds safe manual rim-pull — typical on large butterflies and high-class gates. State gear ratio / rim-pull limit, handwheel diameter, open/close direction, and mounting standard on the RFQ.
RFQ fields
- Manual gear vs bare stem handwheel
- Max rim-pull (project HSE limit)
- Position indicator required yes/no
- Locking device / chainwheel if needed
- Future actuator mounting (ISO 5210/5211)
Related: gear vs handwheel, RFQ.
Frequently asked questions
When is a gear mandatory?
When seating torque exceeds safe rim-pull on a lever or bare handwheel — common on DN200+ butterflies and large Class 300+ gates.
Do I need ISO 5211?
ISO 5211 (or ISO 5210 for multi-turn) mounting facilitates actuator upgrade later. State it if the project standard requires it.