Is ASTM WCB the same as EN GP240GH?
They are commonly treated as near-equivalents for carbon steel valve castings, but chemistry, heat treatment and impact requirements must still match the purchaser specification.
Updated 2026-11-08 · Screening reference for engineers & contractors.
Direct answer · ASTM ↔ EN valve MOC
| ASTM casting | Common EN / DIN near-eq. | UNS / notes | Typical valve use |
|---|---|---|---|
| A216 WCB | EN 10213 GP240GH (1.0619) | J03002 · −29 to ~425 °C screening | Gate / globe / check / ball Class 150–600 |
| A216 WCC | GP240GH / GP280GH family | Higher strength than WCB | Where WCC is specified on MTO |
| A352 LCB | EN low-temp CS castings (G20Mn5 family) | Impact at −46 °C typical | Low-temp hydrocarbon / LNG feed |
| A352 LCC | G20Mn5 / equivalent LTCS | Impact at −46 °C; stronger than LCB | Preferred LTCS on many EPC lists |
| A217 WC6 | G17CrMo5-5 (1.7357) family | 1¼Cr–½Mo | Steam / hot oil elevated temp |
| A217 WC9 | G17CrMo9-10 (1.7379) family | 2¼Cr–1Mo | Higher steam temp than WC6 |
| A217 C5 | G17CrMo5-5 / 5Cr family | 5Cr–½Mo | Refinery hot hydrocarbon |
| A217 C12 / C12A | GX12CrMoVNbN9-1 family | 9Cr–1Mo (+V Nb for C12A) | High-temp power / HRSG |
| ASTM forging | Common EN near-eq. | Notes | Typical use |
|---|---|---|---|
| A105 | EN 10222-2 P250GH (1.0460) | Standard CS forging | Forged ball / gate Class 800–2500; flanges |
| A350 LF2 | P355NL1 / P280GH LT notes | Impact tested LTCS | Low-temp forged valves |
| A182 F11 | 13CrMo4-5 (1.7335) | 1¼Cr–½Mo | Alloy forged valves / BW ends |
| A182 F22 | 10CrMo9-10 (1.7380) | 2¼Cr–1Mo | Higher temp steam service |
| A182 F5 | X12CrMo5 (1.7362) | 5Cr–½Mo | Refinery hot lines |
| A182 F9 / F91 | X10CrMoVNb9-1 (1.4903) | 9Cr family | Power plant high temp |
| A182 F304 / F304L | 1.4301 / 1.4307 | Austenitic SS | Forged SS valves |
| A182 F316 / F316L | 1.4401 / 1.4404 | Mo-bearing SS | Corrosive / chloride caution |
| A182 F51 (duplex) | 1.4462 | UNS S31803 / S32205 | Seawater / chloride strength |
| A182 F53 / F55 | 1.4410 / 1.4501 | Super duplex | Severe seawater / subsea |
| ASTM casting | EN near-eq. | Wrought counterpart | Notes |
|---|---|---|---|
| A351 CF8 | 1.4308 (GX5CrNi19-10) | 304 / F304 | General stainless casting |
| A351 CF8M | 1.4408 (GX5CrNiMo19-11-2) | 316 / F316 | Most common SS valve body |
| A351 CF3 | 1.4306 / 1.4309 family | 304L | Low-carbon; weld-friendly |
| A351 CF3M | 1.4404 / 1.4409 family | 316L | Low-carbon CF8M |
| A351 CN7M | Alloy 20 cast family | N08020 | Sulphuric / chemical |
| A890 4A (CD3MN) | 1.4470 family | F51 duplex | Duplex casting |
| A890 5A / 6A | Super duplex cast | F53 / F55 | High PREN seawater |
| A494 M35-1 / CW6MC | Ni-Cu / Ni-Cr-Mo cast | Monel / 625 family | Severe corrosion — specify carefully |
| Need | Prefer | Avoid saying |
|---|---|---|
| DN 50+ flanged gate / globe | Casting grade (WCB, CF8M) | “A105 body” without confirming forged design |
| Class 800–2500 small bore | Forging grade (A105, F316) | “WCB Class 1500” unless casting is qualified |
| EN datasheet language | Write EN grade + ASTM option | Assuming GP240GH ≡ WCB without MTC match |
| Impact / LT service | LCB/LCC or LF2 | Standard WCB / A105 without impact tests |
Screening disclaimer: “Equivalent” here means grades commonly cross-referenced on EPC material lists. Chemistry, heat treatment, impact energy, NACE hardness and purchaser notes can still differ. Confirm against the current ASTM / EN edition and the approved datasheet before PO.
| Field | Why |
|---|---|
| ASTM or EN grade (exact) | Avoids wrong casting/forging family |
| Size · Class/PN · ends | Construction envelope |
| Design temperature / media | Confirms WCB vs alloy vs SS |
| Impact / NACE / IBR notes | Special testing & paperwork |
| EN 10204 3.1 MTC required? | Mill cert scope |
| Quantity + delivery | Pricing & lead time |
They are commonly treated as near-equivalents for carbon steel valve castings, but chemistry, heat treatment and impact requirements must still match the purchaser specification.
A105 is a forging grade; WCB is a casting grade. They are not interchangeable constructions — choose forging or casting per valve design and size.
Yes. State the ASTM or EN grade, size, Class/PN, ends and quantity on contact.html for a quote from Ahmedabad.