Buttweld Valve Schedule Chart (Sch 40 / Sch 80)

Updated 2026-11-08 · Screening reference — verify against purchaser spec and current standard editions.

Direct answer · BW schedule chart

Buttweld valves must state pipe schedule on the PO. Sch 40 and Sch 80 have different walls — end prep and bore must match the mating pipe. Flanged valves do not replace a schedule callout when the line is BW.

Using this chart on a BOQ? Send size · class/PN · MOC · ends · qty for an Ahmedabad quote.

Contact / RFQ WhatsApp

Why schedule is mandatory on BW RFQs

If missing…Site risk
Schedule omittedWrong bevel / ID mismatch
Sch 40 valve on Sch 80 pipeWeld fit-up problems
Reduced bore unmarkedUnexpected ΔP / pigging issues

RFQ templates

ServiceExample
Process CS6" Class 300 WCB gate, BW Sch 40, RF not applicable
HP steam3" Class 600 WC6 globe, BW Sch 80
SS process4" Class 150 CF8M ball, BW Sch 40S

See also pipe schedule chart for wall thickness.

FAQ

Is Sch 40S the same as Sch 40?

Stainless “S” schedules differ — use B36.19 for stainless.

Full bore vs reduced bore?

State explicitly; reduced bore changes Cv and pigging.

NDE on BW ends?

Add RT/UT/MT scope on the RFQ if required by ITP.

Related charts