Cv to Kv Conversion Chart

Updated 2026-11-08 · Flow-coefficient unit conversion for engineers & contractors.

Direct answer · Cv ↔ Kv chart

Kv = 0.865 × Cv and Cv = 1.156 × Kv. Cv is US customary (gpm water at 1 psi ΔP, 60 °F). Kv is metric (m³/h water at 1 bar ΔP, 5–40 °C). Convert units before comparing IEC/EN Kv sheets to ASME Cv catalogues.

Need a sized valve quote — size · class/PN · MOC · ends · required Cv or Kv · qty.

Contact / RFQ WhatsApp

Formulas

DirectionFormulaDefinition
Cv → KvKv = 0.865 × CvKv in m³/h at 1 bar
Kv → CvCv = 1.156 × KvCv in gpm at 1 psi
Liquid sizing (Cv)Cv = Q × √(SG / ΔP)Q = gpm, ΔP = psi, SG relative to water
Liquid sizing (Kv)Kv = Q × √(SG / ΔP)Q = m³/h, ΔP = bar

0.865 / 1.156 are the IEC/ISA industry factors used on control-valve datasheets. Always confirm against the purchaser calculation note if a project uses a rounded 0.87 factor.

Worked examples

GivenConvertResult
Cv = 100× 0.865Kv ≈ 86.5
Cv = 250× 0.865Kv ≈ 216
Kv = 50× 1.156Cv ≈ 57.8
Kv = 200× 1.156Cv ≈ 231
Q = 120 gpm, ΔP = 4 psi, SG = 1Cv = 120 × √(1/4)Cv ≈ 60 → Kv ≈ 51.9

Quick conversion table

CvKv ≈KvCv ≈
10.8711.16
54.3355.78
108.651011.6
2521.62528.9
5043.35057.8
10086.5100116
200173200231
500433500578
100086510001156

FAQ

What is the exact Cv to Kv formula?

Kv = 0.865 × Cv. Conversely Cv = 1.156 × Kv. These factors convert US Cv (gpm at 1 psi) to metric Kv (m³/h at 1 bar).

Should I quote Cv or Kv on an RFQ?

State the unit the purchaser uses. ASME/API datasheets usually list Cv; EN/IEC control-valve sheets often list Kv. Convert before comparing catalogue curves.

Does conversion replace a manufacturer Cv test?

No. Conversion only changes units. Freeze sizing on the published Cv/Kv for the exact construction, trim and travel.

Related charts