Is DN always equal to mm ID?
No. DN is a dimensionless nominal size. ID depends on schedule / wall.
Updated 2026-11-10 · Screening tool · Verify against current standards before design freeze.
Direct answer · What this calculator does
Got a size from this tool? Send type · size · Class/PN · MOC · ends · qty.
Contact / RFQ Quote page WhatsAppChange either DN or NPS — results update both ways when you calculate.
Copy into your RFQ or open Contact / RFQ.
| DN | NPS | Approx mm |
|---|---|---|
| 15 | ½ | 15 |
| 25 | 1 | 25 |
| 50 | 2 | 50 |
| 80 | 3 | 80 |
| 100 | 4 | 100 |
| 150 | 6 | 150 |
| 200 | 8 | 200 |
| 300 | 12 | 300 |
No. DN is a dimensionless nominal size. ID depends on schedule / wall.
EPC packages often blend ASME and EN documents. Dual-state sizes reduce RFQ errors.
Supported in the converter — less common but used on many utility headers.
Supreme Valves India supplies constructions by size, rating, MOC and ends. Outputs are screening aids, not certified design.