Pipe Schedule ID Calculator — NPS, Wall, Inside Diameter

Updated 2026-11-10 · Screening tool · Verify against current standards before design freeze.

Direct answer · What this calculator does

Pick NPS and schedule. The calculator returns OD, wall and ID used for buttweld bore match, velocity and pressure-drop inputs.

Got a size from this tool? Send type · size · Class/PN · MOC · ends · qty.

Contact / RFQ Quote page WhatsApp

Pipe inputs

Results

Copy into your RFQ or open Contact / RFQ.

Formulas used

ID = OD − 2 × wall
ASME B36.10M carbon steel dimensions (common NPS)
Always confirm project pipe spec — some sites use Sch 160 / XXS / EN wall series
For BW valves, state “bore to match Sch 40 / Sch 80” on the RFQ so the end prep matches the pipe ID.
Screening only. Stainless tubing and EN pipes can differ. This table is ASME B36.10-style screening for carbon steel NPS.

Reference table

NPSOD inSch40 wallSch80 wall
11.3150.1330.179
22.3750.1540.218
33.5000.2160.300
44.5000.2370.337
66.6250.2800.432
88.6250.3220.500
1010.7500.3650.500
1212.7500.4060.500

How to use the result on an RFQ

  1. Run with your design data.
  2. Record the green outputs.
  3. Paste type, size, Class/PN, MOC, ends, qty into contact or WhatsApp.
  4. Request 3.1 MTC / API 598 notes when required.

FAQ

Why does Sch 80 ID matter for valves?

BW ends should match pipe bore to avoid steps that erode or disturb flow. State schedule on BW RFQs.

Is DN equal to NPS?

Approximately for many sizes, but not a 1:1 identity at every diameter. Prefer stating both when mixed units appear.

Sch 40 vs STD?

For many NPS ≤10, Sch 40 ≈ STD; above that they diverge — use the numeric schedule.

Related calculators & charts

Supreme Valves India supplies constructions by size, rating, MOC and ends. Outputs are screening aids, not certified design.