Control Valve Seat Leakage Rate Calculator — FCI 70-2 Screening

Updated 2026-11-10 · Screening tool · Verify against current standards before design freeze.

Direct answer · What this calculator does

FCI 70-2 Classes define maximum seat leakage. This calculator screens Class IV (% of rated capacity), Class V (pressure×diameter based) and Class VI (bubble/ml limits by port size) so you can write the right leakage class on the RFQ.

Got a size from this tool? Send type · size · Class/PN · MOC · ends · qty.

Contact / RFQ Quote page WhatsApp

Leakage class inputs

inch
US gpm water equiv.
psi

Results

Copy into your RFQ or open Contact / RFQ.

Formulas used

Class IV ≈ 0.01% of rated valve capacity (water) screening discussion
Class V ≈ 5×10⁻⁴ ml / min / psid / inch of seat diameter (order-of-magnitude form used in industry discussions — confirm edition)
Class VI bubble rates by port diameter per FCI table
Metal seats rarely meet Class VI — soft seats do. State class explicitly.
Screening only. Use the current FCI 70-2 edition text for acceptance. Numbers here are engineering screening aids.

Reference table

ClassTypical seat
IVMetal
VMetal tight
VISoft seat

How to use the result on an RFQ

  1. Run with your design data.
  2. Record the green outputs.
  3. Paste type, size, Class/PN, MOC, ends, qty into contact or WhatsApp.
  4. Request 3.1 MTC / API 598 notes when required.

FAQ

Is API 598 the same as FCI 70-2?

No. API 598 is usually for isolation valve production tests; FCI 70-2 is control-valve seat leakage classification.

Can butterfly meet Class VI?

Soft-seat butterflies often can; metal-seat generally not.

What to write on RFQ?

“Seat leakage FCI 70-2 Class __” plus test fluid.

Related calculators & charts

Supreme Valves India supplies constructions by size, rating, MOC and ends. Outputs are screening aids, not certified design.