Is EN 1092-1 PN16 the same as ASME Class 150?
No. Pressure capability may be in a similar ballpark at ambient for many steels, but OD, PCD, bolt size and facing details differ. PN16 and Class 150 flanges generally do not bolt together.
Updated 2026-11-08 · Screening reference — confirm against the current EN 1092-1 edition before IFC.
Direct answer · EN PN16 flanges
Values below are millimetre screening figures for EN 1092-1 steel flanges PN16 (typical Type 01 / 11 / 05 bolting pattern). Flange thickness, facing type (A/B/C/D/E/F/G/H) and hub dimensions also matter — freeze on the current EN 1092-1 tables and the project piping class.
| DN | ≈ NPS | Flange OD (mm) | Bolt circle PCD (mm) | No. of bolts | Bolt size |
|---|---|---|---|---|---|
| 15 | ½" | 95 | 65 | 4 | M12 |
| 20 | ¾" | 105 | 75 | 4 | M12 |
| 25 | 1" | 115 | 85 | 4 | M12 |
| 32 | 1¼" | 140 | 100 | 4 | M16 |
| 40 | 1½" | 150 | 110 | 4 | M16 |
| 50 | 2" | 165 | 125 | 4 | M16 |
| 65 | 2½" | 185 | 145 | 4 | M16 |
| 80 | 3" | 200 | 160 | 8 | M16 |
| 100 | 4" | 220 | 180 | 8 | M16 |
| 125 | 5" | 250 | 210 | 8 | M16 |
| 150 | 6" | 285 | 240 | 8 | M20 |
| 200 | 8" | 340 | 295 | 12 | M20 |
| 250 | 10" | 405 | 355 | 12 | M24 |
| 300 | 12" | 460 | 410 | 12 | M24 |
| 350 | 14" | 520 | 470 | 16 | M24 |
| 400 | 16" | 580 | 525 | 16 | M27 |
| 450 | 18" | 640 | 585 | 20 | M27 |
| 500 | 20" | 715 | 650 | 20 | M30 |
| 600 | 24" | 840 | 770 | 20 | M33 |
| Topic | EN 1092-1 PN16 | ASME B16.5 Class 150 |
|---|---|---|
| Size label | DN (metric) | NPS (inch) |
| Bolts | Metric (M12–M33) | UNC (½"–1¼" typical) |
| PCD / OD | EN tables | ASME tables — different |
| Interchange | Generally not bolt-compatible — adapters only if project-approved | |
| Pressure cue | ~16 bar nominal designation | Class rating; ambient bar varies by material group |
| RFQ wording | “EN 1092-1 PN16 RF Type B …” | “ASME B16.5 Class 150 RF …” |
Pressure equivalence is approximate only. See also PN16 vs Class 150 valves and the ASME B16.5 Class 150/300 chart.
| Size | PN16 OD / PCD / bolts | Class 150 OD / PCD / bolts | Verdict |
|---|---|---|---|
| DN 100 / 4" | 220 / 180 / 8×M16 | 228.6 / 190.5 / 8×⅝" | Different PCD & bolt thread |
| DN 150 / 6" | 285 / 240 / 8×M20 | 279.4 / 241.3 / 8×¾" | Near PCD but not a match — do not force |
| DN 200 / 8" | 340 / 295 / 12×M20 | 342.9 / 298.5 / 8×¾" | Bolt count differs (12 vs 8) |
| Field | Example |
|---|---|
| Flange standard | EN 1092-1 |
| Rating | PN16 |
| Facing / type | Type B raised face (or as datasheet) |
| Size / MOC | DN 150 · GS-C25 / 1.0619 / CF8M as required |
| Do not write | “PN16 Class 150” as if one flange |
Screening data only. Confirm OD, PCD, thickness, facing height and bolt-hole diameter in the current EN 1092-1 edition before fabrication or valve purchase.
No. Pressure capability may be in a similar ballpark at ambient for many steels, but OD, PCD, bolt size and facing details differ. PN16 and Class 150 flanges generally do not bolt together.
Metric coarse bolts (M12, M16, M20, M24, etc.) per EN 1092-1 — not UNC studs used on ASME B16.5.
Yes. State DN, PN16, facing type, MOC and quantity. Do not mix PN16 piping with ASME Class 150 valve flanges unless a documented adapter is approved.