Flange Bolt PCD & Count Helper — ASME Class 150 / 300

Updated 2026-11-10 · Screening tool · Verify against current standards before design freeze.

Direct answer · What this calculator does

Pick NPS and Class. Returns typical PCD, number of bolts and bolt diameter for ASME B16.5 RF flanges so valve and pipe flanges match.

Got a size from this tool? Send type · size · Class/PN · MOC · ends · qty.

Contact / RFQ Quote page WhatsApp

Flange inputs

Results

Copy into your RFQ or open Contact / RFQ.

Formulas used

Data from common ASME B16.5 RF tables (screening)
Always verify against the edition on the project spec
EN 1092-1 PN flanges use different PCD — do not mix
State “ASME B16.5 Class 150 RF” or “EN 1092-1 PN16” explicitly on every flanged RFQ.
Screening only. Raised-face height, RTJ groove and bolt grade are separate selections.

Reference table

NPSCl.150 boltsCl.300 bolts
24 × 5/88 × 5/8
48 × 5/88 × 3/4
68 × 3/412 × 3/4
88 × 3/412 × 7/8

How to use the result on an RFQ

  1. Run with your design data.
  2. Record the green outputs.
  3. Paste type, size, Class/PN, MOC, ends, qty into contact or WhatsApp.
  4. Request 3.1 MTC / API 598 notes when required.

FAQ

Can I mate PN16 to Class 150?

Not by default — PCD and bolt count differ. Use a verified adapter or matching standard.

RF vs RTJ?

RF uses flat gasket; RTJ uses ring gasket in a groove — common on higher classes / hydrocarbon.

Bolt material?

Match temperature and corrosion: B7/2H typical CS; B8 for SS service — per piping spec.

Related calculators & charts

Supreme Valves India supplies constructions by size, rating, MOC and ends. Outputs are screening aids, not certified design.