PN vs ASME Class Working Pressure Calculator

Updated 2026-11-10 · Screening tool · Verify against current standards before design freeze.

Direct answer · What this calculator does

PN ≈ nominal pressure in bar at a reference temperature band. ASME Class maps to a material-group cold working pressure from B16.34 — not a single fixed bar number for all alloys. This calculator shows both views for RFQ alignment.

Got a size from this tool? Send type · size · Class/PN · MOC · ends · qty.

Contact / RFQ Quote page WhatsApp

Rating inputs

Results

Copy into your RFQ or open Contact / RFQ.

Formulas used

PN screening CWP ≈ PN (bar g) at ambient reference
Class screening uses Group 1.1 WCB ambient CWP table
bar × 14.5038 = psi  bar × 1.01972 ≈ kg/cm²
PN16 ≈ Class 150 family for many water/HVAC RFQs — still confirm flange drillings (EN vs ASME)
Never mix EN PN flanges with ASME Class flanges without a verified adapter. State both pressure rating and flange standard on the RFQ.
Screening only. Temperature derates CWP. Steam / hot oil must use B16.34 / EN P-T tables for the exact material group.

Reference table

PN≈ bar gCommon pairNotes
PN1010Low-pressure waterCheck actual flange drill
PN1616~Class 150 familyHVAC / utility
PN2525Between 150/300Verify flange
PN4040~Class 300 familyProcess
PN63/10063/100Higher EN ratingsMatch MOC carefully

How to use the result on an RFQ

  1. Run with your design data.
  2. Record the green outputs.
  3. Paste type, size, Class/PN, MOC, ends, qty into contact or WhatsApp.
  4. Request 3.1 MTC / API 598 notes when required.

FAQ

Is PN16 the same as Class 150?

Not identical. Pressure is in a similar band for many water services, but bolt circle and facing differ (EN 1092-1 vs ASME B16.5).

Which should I put on the RFQ?

Write the purchaser standard: “ASME Class 150 RF” or “PN16 EN 1092-1 Type B1” — never only “150# equivalent” without flange standard.

Does SS have the same CWP as WCB?

No. Material group changes the P-T rating. Use the correct B16.34 group.

Related calculators & charts

Supreme Valves India supplies constructions by size, rating, MOC and ends. Outputs are screening aids, not certified design.