Flash Steam Fraction Calculator — Condensate & Blowdown

Updated 2026-11-10 · Screening tool · Verify against current standards before design freeze.

Direct answer · What this calculator does

Flash fraction x ≈ (h_f1 − h_f2) / h_fg2. Use it to size flash vessels and to select globe / angle valves that see two-phase flow.

Got a size from this tool? Send type · size · Class/PN · MOC · ends · qty.

Contact / RFQ Quote page WhatsApp

Flash inputs

kg/h

Results

Copy into your RFQ or open Contact / RFQ.

Formulas used

x = (hf_high − hf_low) / hfg_low
Built-in approximate saturated water enthalpies (kJ/kg) vs bar a
Flash steam mass = x × condensate mass
Valves discharging to flash tanks need erosion-aware trim and correct class for the upstream steam condition.
Screening only. Use steam tables for design freeze. Built-in enthalpies are rounded screening values.

Reference table

P bar ahf approxhfg approx
1.04192257
56402108
107622015
158451947

How to use the result on an RFQ

  1. Run with your design data.
  2. Record the green outputs.
  3. Paste type, size, Class/PN, MOC, ends, qty into contact or WhatsApp.
  4. Request 3.1 MTC / API 598 notes when required.

FAQ

Why do globe valves erode on flash?

Two-phase high velocity. Specify hardfacing / angle pattern when required.

Is blowdown flashing?

Yes — CBD/IBD often flash; design for it.

Link to IBR?

Boiler-connected valves may need IBR documentation in India.

Related calculators & charts

Supreme Valves India supplies constructions by size, rating, MOC and ends. Outputs are screening aids, not certified design.