Direct answer · Updated July 2026
When should I use metal-to-metal instead of soft seat?
Choose metal-to-metal for dry ash, highly abrasive slurry, high temperature (>120°C), or media that cuts elastomer seats. Soft seats give tighter bubble-tight closure on clean or fibre slurry.
Applications
Mining & Tailings
Isolation and line breaking on abrasive slurry, concentrate, and tailings pipelines.
Pulp & Paper
Black liquor, stock, and fibre slurry shut-off with minimal clogging.
Wastewater & Sewage
Raw sewage, grit, and biosolids handling in municipal and industrial plants.
Ash Handling & Power
Fly ash, bottom ash, and FGD slurry isolation in power and cement plants.
Cement & Bulk Solids
Powder, clinker, and pneumatic conveying line isolation.
Chemical Slurry
Viscous, solids-laden, and corrosive process media with SS316 or alloy options.
Complete Knife Edge Gate Valve Range
Flow in one direction — wafer/lug, slurry & pulp service
Shut-off from either direction — self-sealing option
Stellite / SS seat for abrasive ash, dry solids & high temp
EPDM, PTFE, Viton — bubble-tight Class VI closure
Double-acting cylinder, solenoid, limit switches, FRL
Technical Standards
Special Features & Options
- Stellite 6 hardfaced knife gate edge
- No elastomer — survives dry abrasive solids
- High temperature ash and FGD service
- Uni-directional and bi-directional options
- SS316 / WCB / GGG40 body materials
- Pneumatic cylinder for remote ash line isolation
- NACE MR0175 B7M bolting option
Material of Construction
| Part No. | Part Name | Material / Standard |
|---|---|---|
| 01 | Body / Chest | WCB / CF8M / GGG40 |
| 02 | Gate / Blade | SS316 with Stellite 6 hardface edge |
| 03 | Seat Ring | SS316 integral / renewable metal-to-metal |
| 04 | Stem | SS316 |
| 05 | Gland Follower | SS316 / WCB |
| 06 | Packing | Graphite / PTFE for high temperature |
| 07 | Handwheel | Ductile iron / Bevel gear option |
| 08 | Bolting | SS316 / B7M NACE option |
Face-to-Face Dimensions — MSS SP-81 Short Pattern
Typical face-to-face (F-F) dimensions for wafer/lug knife edge gate valves per MSS SP-81 short pattern. Flange drilling per ASME B16.5 Class 150#. Confirm at enquiry for your exact bore and end type.
| DN (mm) | NPS | F-F (mm) | ØD Flange | N Bolts | PCD |
|---|---|---|---|---|---|
| 50 | 2 | 51 | 108 | 4 | 60.3 |
| 80 | 3 | 57 | 190 | 4 | 152.4 |
| 100 | 4 | 57 | 229 | 8 | 190.5 |
| 150 | 6 | 76 | 279 | 8 | 241.3 |
| 200 | 8 | 89 | 343 | 8 | 298.5 |
| 250 | 10 | 114 | 406 | 12 | 362.0 |
| 300 | 12 | 127 | 483 | 12 | 431.8 |
| 350 | 14 | 140 | 533 | 12 | 476.3 |
| 400 | 16 | 152 | 597 | 16 | 539.8 |
| 450 | 18 | 171 | 635 | 16 | 577.9 |
| 500 | 20 | 190 | 699 | 20 | 635.0 |
| 600 | 24 | 222 | 813 | 20 | 749.3 |
Lug type with tapped holes; wafer type with through-holes. DN650–900 and PN16/Class 300 on request.
Also available: Soft seated EPDM/PTFE variant; hydraulic actuation for high-pressure mining Class 300/600.
Request Knife Edge Gate Valve Quote
Send valve type (uni/bi-directional, seat type), size DN, end connection, actuation (manual/pneumatic), quantity, and application. Engineering response within 24 hours.
Or call +91 97732 78770 · info@supremevalves.in
Frequently Asked Questions
When should I use metal-to-metal instead of soft seat?
Choose metal-to-metal for dry ash, highly abrasive slurry, high temperature (>120°C), or media that cuts elastomer seats. Soft seats give tighter bubble-tight closure on clean or fibre slurry.
What leakage class applies to metal seats?
Metal-to-metal knife gates are tested per MSS SP-81 seat leakage limits. For zero-leakage requirements on slurry, consider soft seated bi-directional with EPDM liner.
Is Stellite hardfacing standard?
Stellite 6 hardfacing on the gate cutting edge is standard for abrasive ash and mining service. Confirm trim level on your RFQ for severe erosive applications.
Valve selection guides
RFQ checklist
Send size, pressure class (PN / Class), MOC, end connection, quantity, and delivery city via contact.html. Related: quotation checklist · lead hub · how to buy · RFQ landings.
