Valve Material Temperature Limit Selector

Updated 2026-11-10 · Screening tool · Verify against current standards before design freeze.

Direct answer · What this calculator does

Pick design temperature and optional corrosion note. The tool suggests a starting body material family — then freeze on ASME B16.34 P-T ratings and the purchaser material spec.

Got a size from this tool? Send type · size · Class/PN · MOC · ends · qty.

Contact / RFQ Quote page WhatsApp

Temperature / duty inputs

°C

Results

Copy into your RFQ or open Contact / RFQ.

Formulas used

Screening bands (body):
WCB ~ −29 to 425°C · LCB lower temp · WC6/WC9 higher steam · CF8/CF8M stainless · NAB seawater
Always apply B16.34 group derating for pressure at temperature
Temperature alone is not enough — chloride, acid, H2S and erosion change the alloy.
Screening only. NACE / sour service and cryogenic impact testing are separate requirements.

Reference table

MaterialScreening bandTypical duty
WCB−29…425°CSteam / hydrocarbon general
LCB/LCCLower tempCold climates / LT hydrocarbons
WC6/WC9Higher steamPower / high T
CF8MCryo to ~500°C*Corrosive / clean
NAB C95800Seawater bandMarine / desal

*Confirm stainless P-T and sensitization limits for the exact grade.

How to use the result on an RFQ

  1. Run with your design data.
  2. Record the green outputs.
  3. Paste type, size, Class/PN, MOC, ends, qty into contact or WhatsApp.
  4. Request 3.1 MTC / API 598 notes when required.

FAQ

Is CF8M always better than WCB?

For chlorides/acids often yes; for high-pressure steam WC6/WCB may be correct and cheaper.

What about Duplex?

Strong for seawater/chloride — state PREN and design T on RFQ.

NACE needed?

Only if sour service is specified — do not assume.

Related calculators & charts

Supreme Valves India supplies constructions by size, rating, MOC and ends. Outputs are screening aids, not certified design.