Supreme Valves India (Ahmedabad) supplies gate valves in WCB, SS304, SS316, cast iron and bronze / gunmetal, 1/2 inch to 48 inch, Class 150 to 2500, with EN 10204 3.1 MTC and API 598 test reports. Standard 1/2 to 4 inch Class 150 / 300 sizes are ex-stock or dispatched in 3 to 7 days.
Cast steel, stainless steel, forged, cast iron and gunmetal gate valves for steam, oil and gas, water and process isolation. 1/2" to 48", Class 150 to 2500. Standard sizes ex-stock from Ahmedabad.
Supreme Valves India (Ahmedabad) supplies gate valves in WCB, SS304, SS316, cast iron and bronze / gunmetal, 1/2 inch to 48 inch, Class 150 to 2500, with EN 10204 3.1 MTC and API 598 test reports. Standard 1/2 to 4 inch Class 150 / 300 sizes are ex-stock or dispatched in 3 to 7 days.
What is the difference between a gate valve and a globe valve?
A gate valve is for full-open / full-close isolation with low pressure drop. A globe valve is for throttling and flow regulation, with higher pressure drop. Use gate valves on isolation duty and globe valves where flow must be controlled.
Which gate valve standard applies: API 600, API 602 or BS 5352?
API 600 covers flanged / butt-weld steel gate valves (typically 2 inch and above). API 602 covers compact forged gate valves, 2 inch and below. BS 5352 / BS 1414 are used on some UK and Gulf specifications. State the standard on the RFQ.
Solid wedge or flexible wedge?
Flexible wedge is the default for steam and temperature-cycling service because it tolerates body distortion. Solid wedge is common on water, oil and general service in smaller sizes.
What documents come with your gate valves?
EN 10204 3.1 material test certificate, API 598 shell and seat test report, and GA drawing on request. IBR Form III-C is available for boiler service. Third-party inspection (TPI) can be arranged at buyer cost.
How fast can you dispatch gate valves?
Standard WCB / SS304 / SS316 gate valves, 1/2 to 4 inch, Class 150 and 300, are ex-stock or dispatched in 3 to 7 days. Larger sizes, Class 600 and above, IBR and special trims are quoted with a confirmed lead time.